OIL FILTER 300TDI 200TDI V8
OIL FILTER 300TDI 200TDI V8
Oil filter with part number ERR3340 fits most 4 cylinder Defender Discovery and RR 200tdi 300tdi and V8 up to 2002.
OIL FILTER 300TDI 200TDI V8
Oil filter with part number ERR3340 fits most 4 cylinder Defender Discovery and RR 200tdi 300tdi and V8 up to 2002.
TOW BRACKET - ADJUSTABLE - 90/110
TOW BRACKET - ADJUSTABLE - 90/110
This part has or accessory has been superceded by the new part number above. However you can still buy the item using any options shown below.
TOW BRACKET - ADJUSTABLE - 90/110
This part has or accessory has been superceded by the new part number above. However you can still buy the item using any options shown below.
TOW BRACKET - ADJUSTABLE - 90/110
TOW BRACKET - ADJUSTABLE - 90/110
Rear suspension mounting bracket with part number KHC500070 fits the Land Rover Freelander 1 1996-2006 all models This can be a tight fit, our tip is to loosen the other two suspension brackets to give a little play to fit it in then tighten all the screws and bolts up. The other two brackets do not normally need to be replaced.
TOW BRACKET - ADJUSTABLE - 90/110
Rear suspension mounting bracket with part number KHC500070 fits the Land Rover Freelander 1 1996-2006 all models This can be a tight fit, our tip is to loosen the other two suspension brackets to give a little play to fit it in then tighten all the screws and bolts up. The other two brackets do not normally need to be replaced.
BRAKE VACUUM PUMP 300TDI DEF & DS
BRAKE VACUUM PUMP 300TDI DEF & DS
Brake vacuum pump with part number ERR3539 is fitted to the 300tdi engine found in Defender Discovery 1 and the Range Rover Classic This is a common failure on the 300Tdi engine. Be sure that the new pump is properly primed before starting the engine. See manual for correct procedure.
BRAKE VACUUM PUMP 300TDI DEF & DS
Brake vacuum pump with part number ERR3539 is fitted to the 300tdi engine found in Defender Discovery 1 and the Range Rover Classic This is a common failure on the 300Tdi engine. Be sure that the new pump is properly primed before starting the engine. See manual for correct procedure.